Over 20,000 Spares In-Stock

Centrifugal Separator Spare Parts

Separator Spares & Equipment, LLC is the largest, independent stocking supplier of aftermarket and original (OEM) spare parts of Alfa Laval Centrifugal Separators and GEA Westfalia Centrifugal Separators in the Americas.

Centrifugal Separators

We have over 20,000 parts physically in-stock, in our climate-controlled facility, in Houma, Louisiana. All spares are of genuine quality. Our centrifugal separator spare parts are fully compatible with OEM parts and come complete with a 12-month warranty on all non-wear items. The Separator Spares & Equipment brand comes on every box; therefore, you can rest assured that our whole team is behind you every step of the way.

Our centrifugal separator spare parts comply with the latest specifications and prolong the lifecycle of your installation. They are designed to provide unparalleled performance with the lowest lifecycle cost. On-going research and development ensures that you will always get the latest applicable parts and ensured reliability. Our supplied centrifugal separator aftermarket parts give you true cost-efficient peace of mind.

Separator Spares & Equipment focuses to provide you with superior quality parts, at a good value. Our new replacement parts undergo strenuous and strict inspection procedures to ensure the quality of our products. At Separator Spares & Equipment, we not only offer you premium parts, but also exceptional service, outstanding savings, and the support you need to get your order quickly and accurately.

Whether you are looking for alternative replacement parts or genuine spares and/or accessories, we are your best choice. We allow you to save money without losing quality. Let us help keep your equipment’s maintenance schedule on track.

Centrifuge Spare Parts

OEM and Aftermarket Parts

We provide centrifugal separator spare parts and accessories for the following brands:


Pressure Driven Centrifuge:

Large Selection of Centrifuge Parts

Bearing Kits
Centripetal Pumps
EPC Control Panels
Feed Pumps
Flow Indicators
Flow Switches
Gear Box Oil
Intermediate Service Kits
Major Service Kits
Minor Rebuild Kits
Pressure Indicators
Pressure Switches
Preventive Maintenance
Pump Service Kits
Reconditioned Bowls
Replacement Parts
Seal Kits
Seal Rings
Service Kits
Solenoid Valves
Temperature Sensors
Valve Plugs
Water Transducers
and more …
Disc Stack Centrifuge
Solids-Retaining Separator


A solids-retaining separator is used for separating liquid mixtures that have only a low amount of solids in them – no more than 1%. This is because the separator must be stopped, the centrifuge bowl dismantled, and the solids removed by hand.

Solids-Ejecting Separator

A solids-ejecting separator is used for liquids with a higher solids content (up to 10%) or when it’s undesirable to stop the centrifuge for cleaning. The solids that collect inside the centrifuge bowl are shot out by periodically uncovering slots in the periphery of the centrifuge bowl for a fraction of a second.

Nozzle Separator

A nozzle separator is used when a process liquid contains over 10% solids. The solids leave the centrifuge bowl in a continuous stream. The nozzles in the nozzle bowl centrifuge constantly eject sludge as it accumulates.

Separator Spares & Equipment supplies aftermarket and genuine (OEM) centrifuge parts and genuine for Alfa Laval Separator, GEA Westfalia Separator, and Mitsubishi Oil Purifiers. If you need replacement parts for your Alfa Laval, GEA Westfalia, or Mitsubishi Oil Purifiers, then Separator Spares & Equipment is the place to go.

Decanter Centrifuge

Decanter-Centrifuge-SparesA decanter centrifuge is used for dewatering sludge containing up to 60% solids. The decanter centrifuge has a horizontal drum or rotor in which separation takes place in the same way as a vertical separator. The decanter does not have a disc stack; however, the solids are removed continuously from the drum by a screw conveyor.

Pressure Driven Centrifuge
Centrifugal-Oil-FilterA pressure driven centrifuge (also called a centrifugal oil filter) works as a bypass filter, processing about 10% of the total oil flow. The centrifugal oil filter extracts contaminated particles from your engine’s lubricating oils, reducing wear, and extending the lifetime of that vital component.

The pressure driven centrifuge must be stopped, the centrifuge bowl dismantled, and the sludge is cleaned out of the centrifuge bowl manually from time to time.

Centrifugal oil filters are an important part of your engine’s lubricating system, and our team is here to help you keep your equipment running smoothly. We are continuously increasing our stock parts to meet customer demands. We have the parts and expertise you need to get the most out of your centrifugal oil filter.

Over 20,000 Centrifuge Spare Parts In-Stock
Alfa Laval Centrifuge
GEA Westfalia Separator
and more …

Related Videos

Similar Products