MMB 305 Centrifuge
High Speed Disc Stack Centrifuge
Separator Spares & Equipment, LLC is an Authorized Distributor for high-speed disc stack centrifuges manufactured by WSK Separators. The MMB 305 Centrifuge is extremely efficient in removing fine solid particles and liquid contaminants from different kinds of mineral oils. We supply a full line of solids-retaining centrifugal separators and recommended centrifuge spare parts.
MMB 305S-11 Solids Retaining Centrifuge
The MMB 305 high speed disc stack centrifuge is designed for purification or clarification of distillates, marine diesel oils, lubricating oils, hydraulic oils, and various mineral oils used on-board marine installations and in industrial applications. The MMB 305 solids retaining centrifuge is specifically designed for cleaning of mineral oils from water and solid particles (sludge).
MMB 305 Centrifuge Design
The MMB 305 separator consists of a frame lower part, intermediate part, frame top part, and frame hood. The separator is driven by an electric motor, friction coupling, flat belt, and vertical drive shaft. The motor drives the friction coupling, which drives the flat belt (belt driven), ensuring a gradual start, preventing overload. The MMB 305 oil separator requires an independent oil feed pump.
The bowl is fixed onto the vertical drive shaft situated in the top part of the frame. The frame hood is easily removed to enable easy of access when cleaning or carrying out maintenance. The separation process takes place in the rotating solids-retaining bowl.
A built-in paring disc pump discharges the cleaned oil. The discharge of clean oil is continuous, while solid particles are collected in the separator and have to be removed manually from the bowl regularly by hand.
MMB 305 Centrifuge
Solids Retaining Separator
Standard Equipment:
- MMB 305 Centrifugal Separator
- Motor: 440 volts, 60 Hz, 3-phase
- Complete set of gravity discs
- Complete set of tools
- Set of spare parts for extended use
- Set of instruction manuals
Optional Equipment:
- Motor: 380 volts, 50 Hz, 3-phase
- Motor: Dual 208-230/440 volt, 60Hz, 3-phase
- MAWA-40 Water Seal Alarm
- SEPWA-2E Combine Dual Motor Starter & Water Seal Alarm
- Oil Heating System, Steam or Electric
- Control Panel
- Motor Starter
- Oil Feed Pump
- Skid Mounted
Separator Throughputs and Capacities
The MMB 303 Separator is designed for continuous treatment of fuel & lube oils, hydraulic, diesel, turbine, and waste oils. (Throughputs may vary depending on temperature and viscosity of liquids.)
Distillate: 4,700 l/h (1,242 gph)
MDO: 3,900 l/h (1,030 gph)
Downloads
Similar Products
