Xylem Standard Xchange
Separator Spares & Equipment, LLC specializes in genuine Xylem Standard Xchange (formerly ITT Standard) heat exchangers and accessories. We are an Authorized Xylem Standard Xchange Distributor. Standard Xchange, a Xylem brand, is a leading designer and manufacturer of a wide range of heat transfer products, including shell and tube, brazed plate, gasketed plate, and air-cooled exchangers serving a wide range of industrial applications.
In 1986, American Standard was purchased by ITT Corporation, and the heat transfer line became known as ITT Standard. After corporate restructuring in 2012, ITT Standard became Standard Xchange, part of Xylem, Inc. Formed from several of ITT’s water, fluid handling, and analytics businesses, Xylem is a company focused on solving the world’s most complex water-related problems. The Xylem portfolio includes Standard Xchange along with other well-known and respected product brands, including Flygt, Goulds Water Technology, and Bell & Gossett.
Xylem Standard Xchange Gasketed Plate Heat Exchangers
There are several reasons ITT Standard heat exchangers are found in just about every major power generation plant in North America. For more than 90 years, ITT Standard has been the preferred supplier of heat transfer solutions to the power industry.
Need to replace gaskets or plates for your Standard Xchange heat exchangers?
Replace damaged gaskets and plates with confidence. Our wide range of spares for Xylem Standard Xchange plate heat exchangers ensures an efficient solution for your application. Eliminate costly downtime and achieve optimal performance with our gasketed plate and frame spare parts. Let us help keep your gasketed plate heat exchanger maintenance schedule on track.
Separator Spares & Equipment is your link to genuine Standard Xchange heat exchanger gaskets, plates, and complete heat exchanger units.
Standard Xchange Plate Heat Exchanger Gaskets & Plates
Xylem Standard Xchange Plateflow Series
Standard Xchange plate and frame heat exchangers use a combination of gasketed chevron-style heat transfer plates sequenced inside a frame. The heat transfer plates have holes at the four corners forming a header that distributes the respective flows to the opposite sides of each plate in a countercurrent flow pattern. The fluids are confined to the heat transfer surface of the plate or the port as appropriate with elastomer gaskets. The high heat transfer rate, due to the chevron plates, and countercurrent flow pattern, allow Standard Xchange Plateflow to perform with one-third to one-fifth the surface area of a shell and tube heat exchanger.
Max Flow – up to 30,000 GPM with heat transfer areas up to 47,000 Sq. Ft. 1″ to 2.5″ NPT nozzle connections. 2.5″ to 24″ studded flange connections.
All of Standard Xchange’s Plateflow are to ASME Section VIII Division 1 with a U stamp. Other codes are available upon request.
Materials: 304 and 316 Stainless Steel, Titanium, SMO 254, Alloy C276, AL6XN plates. Gaskets in Nitrile, EPDM, or Viton. Other materials are available upon request.
Applications: Include but are not limited to: heat recovery, equipment heating/cooling, make-up water preheating, chemical processes, central water, stator water, oil, auxiliary water, jacket water, drilling fluid.
Xlyem Standard Xchange Plateflow Free Flow Series
Standard Xchange Free flow models have wider flow channels that can handle fluids with particulate pulp or fibrous materials five times larger than other plate designs. The Standard Xchange Free flow models feature minimum metal-to-metal contact points between adjacent plates to reduce points for particles to catch.
Standard Exchange Free flow models are available in 2″ to 12″ connection sizes.
Standard Xchange Plate and Frame heat exchangers use a combination of gasketed chevron-style heat transfer plates sequenced inside a frame. The heat transfer plates have holes at the four corners forming a header that distributes the respective flows to the opposite sides of each plate in a countercurrent flow pattern. The fluids are confined to the heat transfer surface of the plate or the port as appropriate with elastomer gaskets. The high heat transfer rate, due to the chevron plates, and countercurrent flow pattern, allow Plateflow to perform with one-third to one-fifth of the surface area of a shell and tube heat exchanger.
All of Standard Xchange’s Plateflow are to ASME Section VIII Division 1 with a U stamp. Other codes are available upon request.
Materials: 304 and 316 Stainless Steel, or Titanium plates. Gaskets in Nitrile or EPDM. Other materials are available upon request.
Applications: Xylem Standard Xchange Free Flow feature is ideal for heat reclamation in pulp and paper or ethanol/biodiesel processes where wash water, white water, mash, or other high fiber or coarse fiber fluids are used.
Xlyem Standard Xchange Plateflow Double Wall Series
Double wall units reduce the possibility of fluids intermixing due to a plate failure. Two plates are pressed together to ensure a tight fit to minimize heat transfer losses while maintaining a leak path for detection in case of plate failure. Double wall plates eliminate the possibility of fluid intermixing.
Plate and Frame heat exchangers use a combination of gasketed chevron-style heat transfer plates sequenced inside a frame. The heat transfer plates have holes at the four corners forming a header that distributes the respective flows to the opposite sides of each plate in a countercurrent flow pattern. The fluids are confined to the heat transfer surface of the plate or the port as appropriate with elastomer gaskets. The high heat transfer rate, due to the chevron plates, and countercurrent flow pattern, allow Plateflow to perform with one-third to one-fifth the surface area of a shell and tube heat exchanger.
All of Xylem Standard Xchange’s Plateflow are to ASME Section VIII Division 1 with a U stamp. Other codes are available upon request.
Materials: 316 Stainless Steel or Titanium plates. Gaskets in Nitrile, EPDM, or Viton. Other materials upon request.
Applications: Potable water, pharmaceutical applications, engine fluid cooling.
Xylem Standard Xchange Gaskets and Plates
What are the parts of Xylem Standard Xchange gasketed plate heat exchanger?
In the Xylem Standard Xchange gasketed plate heat exchanger, the corrugated plates are fitted with gaskets that seal the channels and direct the fluids into alternate channels. The plate pack is assembled between a frame plate and a pressure plate, and compressed by tightening bolts fitted between these different plates. The channel plates and the pressure plate are suspended from an upper carrying bar and located by a lower guiding bar, both of which are fixed to the support column. The physical design of the gasketed plate heat exchanger allows easy in-line cleaning, and modification of capacity by the addition or removal of plates.
Separator Spares & Equipment stocks and supplies a complete premium range of genuine and aftermarket Xylem Standard Xchange gasketed plate heat exchange spare parts. If you are looking to upgrade your current ITT Standard Xchanger plate heat exchanger plates, complete plate pack, or replace your heat exchanger gaskets, request a quote!
Need your Xylem Standard Xchange heat exchanger serviced or repaired?
When a gasketed plate heat exchanger starts to leak, the gaskets start to get hard or fall off, and it is time to think about changing your gaskets. Our supplied heat exchanger gaskets provide an efficient solution and ensure the optimal performance of your Xylem Standard Xchange gasket plate heat exchangers.
Looking for a new heat transfer solution?
Separator Spares & Equipment provides a range of services for Xylem Standard Xchange (ITT Standard) gasketed plate heat exchangers. From preventive maintenance and troubleshooting to upgrades, we have you covered!
Regular maintenance of your Xylem Standard Xchange gasketed plate and frame heat exchangers will improve performance and reliability. Service kits from Separator Spares & Equipment will make it easier for your scheduled maintenance to resolve your heat transfer problems, saving you time and lower operating costs.
Did your Xylem Standard Xchange heat exchangers lose performance?
Don’t hesitate to reach out if you have poorly functioning heat exchangers. Separator Spares & Equipment has years of experience servicing these devices and will be happy to provide helpful troubleshooting tips or even parts if necessary. We can help you with your parts and service needs. To learn more about our services, please visit our Plate Heat Exchanger Services webpage. Request a quote!
Need to replace your Xylem Standard Xchange Brazed Plate Heat Exchanger?
Separator Spares & Equipment, LLC specializes in genuine Xylem Standard Xchange brazed plate heat exchangers. The engineered corrugated plate design provides very high heat transfer coefficients resulting in a smaller heat exchanger.
High Performance with a Compact Design
When compared to conventional shell and tube heat exchangers, Xylem Standard brazed plate heat exchangers offer a more compact design:
– One-sixth (1/6ᵗʰ) of the size
– One-fifth (1/5ᵗʰ) of the weight
– One-eighth (1/8ᵗʰ) of the liquid volume
– One-third (1/3ʳᵈ) to one-fifth (1/5ᵗʰ) of the surface area
Please visit our Brazed Plate Heat Exchangers webpage to learn more about brazed plate heat exchangers models.
Similar Products
