MAB 104 Centrifuge
Separator Spares & Equipment, LLC is an Authorized WSK International Distributor. We maintain an extensive, ready-to-ship inventory at our Houma, Louisiana facility, featuring complete WSK Separators for the MAB 103, MAB 104, MMB 304, and MMB 305 series.
MAB 104B-24 Solids-Retaining Centrifugal Separator
The MAB 104 high-speed disc stack centrifuge is designed for purification or clarification of distillate, marine diesel oil, lubricating oils, and various mineral oils used on-board marine installations and in industrial applications. The MAB 104 solids-retaining centrifuge is a proven design for consistent, high-performance water and solids removal.
MAB 104 Centrifuge Design
The MAB 104 separator is driven by a horizontal drive shaft, a friction clutch, a worm wheel gear, and a vertical drive shaft. This is all housed within the separator frame; the worm wheel gear is situated in an oil bath to ensure smooth running. The brake is located at the top of the frame and applies directly to the bowl.
The bowl is fixed to the vertical drive shaft located at the top of the frame. The frame hood is hinged to enable easy access for cleaning or maintenance.
The MAB 104 centrifuge is configured as a purifier (purification), but all parts required to convert it into a clarifier (clarification) are supplied. The separation takes place in a solids-retaining bowl arranged for either clarification or purification. In both cases, contaminated oil is fed through the center, and centrifugal force separates it into phases. The sludge is forced outwards, so it’s easy to remove. The accumulated sludge and solid particles are removed from the bowl regularly by hand. A liquid seal in the bowl prevents oil from escaping through the water outlet.
MAB 104 Separator
Solids Retaining Centrifuge
Standard Equipment
– MAB 104 Centrifugal Separator
– Double pump with fittings
– Motor: 440 volts, 60 Hz, 3-phase
– Complete set of gravity discs
– Water supply device
– Complete set of tools
– Set of spare parts for extended use
– Set of resilient mountings
– Set of instruction manuals
Optional Equipment
– Control Panel
– MAWA-10 Water Seal Alarm
– Motor: 380 volts, 50 Hz, 3-phase
– Motor: Dual 208-230/440 volts, 60 Hz, 3-phase
– Motor Starter
– Oil Heating System, Steam or Electric
– SEPWA-1E Combined Dual Motor Starter & Water Seal Alarm
– Skid Mounted
Separator Throughputs and Capacities
The MAB 104 Separator is designed for continuous treatment of fuel & lube oils, hydraulic, diesel, turbine, and waste oils. (Throughputs may vary depending on temperature and viscosity of liquids.)
Distillate
1,950 l/h (502 gph)
Marine Diesel Oil (MDO)
1,500 l/h (396 gph)
Need MAB 104 centrifuge parts?
Separator Spares & Equipment, LLC specializes in aftermarket and genuine spare parts for Alfa Laval Separators, Alfa Laval Heat Exchangers, and accessories. Alfa Laval is a market leader in separation technology and heat exchanger technology.
The spare parts you need to keep your separator running smoothly are in-stock and ready for shipping!
We have over 20,000 parts physically in stock in our climate-controlled facility in Houma, Louisiana. All disc stack separator spares are of genuine quality. Our spares for centrifugal separators are fully compatible with OEM parts and come complete with a 12-month warranty on all non-wear items. The Separator Spares & Equipment brand comes on every box; therefore, you can rest assured that our whole team is behind you every step of the way.
If you need replacement parts for your Alfa Laval Separators or Alfa Laval Heat Exchangers, then Separator Spares & Equipment is the place to go.
Need your MAB 104 centrifuge serviced?
Separator Spares & Equipment, LLC offers a full range of high-speed disc stack centrifuge services (centrifugal separators) and accessories. Our full-time service department is dedicated to providing the best-in-class service for centrifugal high-speed disc stack centrifuges. It is important to keep your centrifugal separator running at its best in order to maintain optimal performance and efficiency. That’s where regular servicing comes in.
Servicing Alfa Laval MAB 104 centrifuges typically involves the following steps:
- Prepare for the service: This includes gathering all necessary tools and equipment, as well as reviewing the service manual and any relevant safety procedures.
- Shut down the separator: Follow the appropriate shutdown procedures. This may involve closing valves, disconnecting electrical power, and draining the separator of any remaining liquid or product.
- Inspect the separator: Carefully inspect the separator for any visible damage or wear. Pay particular attention to the gasket, seals, and other parts that are prone to wear and tear.
- Use the correct tools and equipment: Using the wrong tools or equipment can damage the separator or cause injury. Be sure to use the tools and equipment specified in the service manual and follow all safety precautions when working with them.
- Replace any worn or damaged parts: Use the service manual to identify which parts need to be replaced, then follow the instructions for replacing them. Be sure to use replacement parts supplied by Separator Spares & Equipment whenever possible.
- Clean and reassemble the separator: Thoroughly clean the separator, paying attention to all internal surfaces and components. Once the separator is clean, reassemble it according to the service manual, making sure that all parts are properly aligned and tightened.
- Test the Disc Stack Centrifuge: Follow the appropriate testing procedures to ensure the separator operates correctly. This may include conducting a visual inspection, running the separator at various speeds and settings, and testing the separator’s performance using appropriate diagnostic tools.
- Record the service: Document the service in the separator’s maintenance log, including the date of the service, any parts that were replaced, and any other relevant information. This will help you track the separator’s maintenance history and ensure it is properly maintained over time.
- Follow the manufacturer’s recommended service intervals: Alfa Laval separators typically require servicing at regular intervals to ensure optimal performance. Be sure to follow the manufacturer’s recommended service schedule to ensure that your separator is serviced at the appropriate intervals.
- Follow proper safety procedures: Separators can be dangerous to work on, especially if they are not properly shut down and isolated. Be sure to follow all safety procedures specified in the service manual and take the necessary precautions to protect yourself and others while working on the separator.
If you’re interested in scheduling a servicing appointment for your Alfa Laval MAB 104 centrifuge, please don’t hesitate to contact us. To learn more, visit our Centrifugal Separator Service webpage.
Downloads
Similar Products
